Air Venturi Tank & Valve Features
- 13 cubic inch D.O.T. and TC approved aluminum bottle
- 3,000 psi maximum pressure (206 bar)
- Regulator output pressure of 1,100 psi
- Fill via male quick disconnect fitting fixed on valve assembly
- Bonnet thread
- DOT, low pressure burst disc
- Restrictor, bleed hole and safety groove
- Mini fill valve is hardened, plated
- Shipped empty
- Weight: .5 lbs
- Black
- ManufacturerAir Venturi
- Condition New
- Accessories Type PCP Accessories
- Warranty 1-year limited warranty
This HPA tank may be the savior for the MCX. Mine stopped working, so sent it in and was advised to not leave the CO2 cartridge it when not using it. I didn't listen and now it fails to work again. I believe this cartridge would end this problem with the gun. Does anyone know if this would correct the problem of the MCX. I use my to knock squirrels out of the tree over my deck!
Pros
Am thinking I will try HPA tank on my SigSauer MCX
Cons
believe it will correct my problem of having to remove the air cylinder from my MCX pellet rifle.
Question?
Login to ask someone who bought this product.I would like to use this on my Umarex Fusion 2 without hacking away the forend, where the CO2 connection is located. I would instead like to run the bottle remotely via a flexible line, perhaps 3 to 5 feet away where I might stash it in a backpack or just place it alongside the rifle on the shooting bench. I would like to know exactly what I need to remotely connect this tank in such a manner to the adapter on the rifle? I imagine at least a flexible HPA hose of the required length and perhaps one or two extra fittings will be necessary, but I have no idea exactly where to find what I need. Any advice is greatly appreciated.
asked Ryan from USADoes this combo really allow you to use it during the cold season?
asked John from USAWill this work with a Umarex 850 M2 .177? How many shots will a full tank provide? What brand of compressor is needed?
asked Dennis from USAWould this be able to fill up my air venturi avenger with out any modifications?
asked Johnathan from USAAs I understand, this bottle is not meant to fill PCP rifles but rather convert CO2 guns to the same high pressure air your Avenger uses. This product is not necessary or useful for you Avenger, as you already have a tube on your rifle that holds high pressure air. If you are looking for a portable vessel from which to fill your Avenger's tube in the field or range without having to use a hand pump or run a noisy compressor, you can use one of the carbon fiber tanks available among the PCP accessories on this site. Obviously, you will need a way to fill the tank.
Ryan from USAInstalled on the Sig Sauer MCX, the stock length is increased by 3 inches compared to using stock CO2 bottles (10.5 inches vs. 7.75 inches). Is there another tank option that would keep the overall length from air entry point to about 8 inches including adapter and regulator? The tank length would have to be 5.5 inches or 140 mm long.
asked Max from USACan I adjust the Regulator output pressure of 1,100 psi to about 1,500 PSI?
asked Jairo from USAcan u use a hand bump for this?
asked Bean from USAIve been using the hand pump they offer here just fine takes a little bit and you get your work out in but can fill three tanks from half full (1500psi) to full (3000psi) in about 15ish mins.
Ken from USAWill this work with a airforce talon p
asked William from USAIs there an hpa tank that will fit umarex air javelin
asked Casey from USAWill this work on sig sauer MCX?
asked Jayson from USAYes, however, it increases the stock length by 3 inches.
Max from USAYes
Mark from USAWill this tank fit a Sig Sauer MCX Virtus PCP Air Rifle?
asked Iksan from USAYes. You do not need the adapter. The tank alone fits the Virtus.
Mark from USAwill this work on Hammerli 850 22?
asked Woodywill this work with a benjamin dull dog
asked Timothy from USAIt fits to Gaunlrt pcp rifle?
asked Nandocan this adapter be used to convert a Hammerli 850 air magnum to HPA without a mammer spring conversion?
asked victor from USAdoes it fit the Beretta CX4 ?
asked Alberto from USAWill this fit the Umarex Gauntlet?
asked Nicholas from USACan you use it as a spare tank for the gauntlet umarex?
asked DanielWill this set up work with the Hammerli 850 AirMagnum?
asked Harry
My gun didn't change as far as power and accuracy. It is still doing 650fps, except now it can do it in the winter too. The regulator is very good because I chronied it and the fluctuation in fps was so tiny I was amazed. I also can shoot all day on one fill because the tank fills to 3kpsi but output is clearly between 1100 and 1200....PERFECTION! Hundreds of rounds per fill!
Pros
Perfect combo for Co2 to HPA conversions! This worked flawlessly for me!
Cons
Had to modify my gun stock to accept the bottle.....WORTH IT THOUGH!