Umarex EBOS

If you leave the co2 connected for a long period of time it will swell the seals and O rings causing a leak. Get yourself an inline co2 / hpa on/off adapter and you will be able to shut off the flow of co2 when not in use. BTW you will also need a co2 to paintball adapter.

try putting lube on the seal before install this will stio the leaking , if it is leaking in side send it back it means it has bad seals thanks .

Mine did the same thing, at first it wasnt very loud but it got worse, not long after it started doing it the electronics shorted out, I'm thinking the leaking co2 got cold and condensed on the electrical board and the whole gun went dead. Now it's in a garbage dump somewhere. I really liked it until it died, I'm thinking of getting another one.

Take a look at the pin and "O" Ring where the CO2 cartridge is installed. If there is a GREEN O-ring set in the seat that seals the CO2 cartridge it may be compressed to the point where it's too thin to seal the cartridge. I believe it's a plastic O-Ring that can lose it's elasticity and doesn't rebound to it's original shape. In other words, the O-ring has lost some "FAT" and flattened out. My personal experience is with a Umarex Morph, the 3 piece gun that is a pistol and "morphs" into a carbine with a barrel extention . It a good gun until I made the mistake of leaving a CO2 cartridge installed in the gun for a few months. As soon as I inserted a fresh cartridge the gas would leak out of the cartridge. After wasting 5 cartridges I called the vendor and found out that Umarex doesn't repair this gun. They have NO parts to even send to a customer so they can attempt to repair it. Fortunately, even after a year of using the gun the vendor volunteered to send me a brand new unit. They didn't even want the old unit back to look at. THAT'S GREAT Cust. Service. BTW, I spoke to Umarex U.S.A . They are located in one of the Southeastern states, maybe Alabama. Aftr hearing my story they boldly told me that they can't help me at all. So I asked if they considered the gun to be a throwaway They had NO response, TERRIBLE Cust. Service.

Add some oil to the cartridge before putting it in this helps keep the seal

Seems like a manufacturer's defect. I had my EBOS for about a year now without any leanks.

I've had no problem with CO2 cartridges sealing properly in my Ebos. I use Pellgun oil on the tip of each new cartridge and I check periodically to make sure the cartridge hasn't worked itself loose because of the vibration. If you're not using Pellgun oil, try it and your problem will likely be solved. Good luck!

I have had this gun for almost 6 months and no problems whatsoever ...awesome rifle! you must have got a faulty gun

Is your Umarex EBOS Brand New?!....If it is, I would contact the MFGr, but It seems that mine did the Same exact thing, and I Have Owned (2) Of these...Mine are just sitting there in a box right now, and Would like to have mine repaired Too..Probably some kind of inner check-valve...

I use the red oil to the tank and body connection

I purchased - NC Star Red Dot 4, D4RGB, Reticles Red & Green Illumination. I am very pleased with the sight.

Any Of the Laser Sights on the Market, with a Picatinny/Weaver rail Mount Should Work, as This BB Pistol has A Weaver Mount right on Top, and One on the Lower front part, which the Forward Grip is Already Attached To...

Please contact our International Shipping Department at [email protected]. They can answer your question a lot better then we can. thanks Sincerely, The Airgun Depot Customer Care Team

Please contact our International Shipping Department at [email protected]. They can answer your question a lot better then we can. thanks Sincerely, The Airgun Depot Customer Care Team

Please contact our International Shipping Department at [email protected]. They can answer your question a lot better then we can. thanks Sincerely, The Airgun Depot Customer Care Team

Please contact our International Shipping Department at [email protected]. They can answer your question a lot better then we can. thanks Sincerely, The Airgun Depot Customer Care Team

Please contact our International Shipping Department at [email protected]. They can answer your question a lot better then we can. thanks Sincerely, The Airgun Depot Customer Care Team

Please contact our International Shipping Department at [email protected]. They can answer your question a lot better then we can. thanks Sincerely, The Airgun Depot Customer Care Team

Hello, Thanks for contacting us. We can ship some items to your area, however some items are restricted from shipping. Please check with your local customs agency for inquires on requirements to purchase. You may order from our website, which will calculate shipping as well as inform you of any possible restriction issues. Please let me know if you have any questions.

Smooth it's bb so would destroy a rifled barrel but still extremely accurate

Smooth

No, the Blackbird chip is desidned specifically for the Drozd.

Sure...try shooting paper spit wads out of this and I'm sure that'll take the speed down a tad!!!

I have not found a way to lower the fps but I believe it to be lower than 500 anyways.

Tony, Please contact our International Shipping Department at [email protected]. They can answer any questions you might have. Sincerely, The Airgun Depot Customer Care Team

540 fps is good for shooting cans but only until the co2 container gets cold or starts to get low. This gun has a high rate of fire and tends to freeze quick. So to answer your question yes it is enough uummph for the first 125-150 rounds.

This rifle works fine. There are no leaks or other problems. Very good rifle for this price. I will recommend it for everyone who is going to get bb rifle.

Michael, We sell the CO2 and BB's here at Airgundepot.com. There is really no difference between the Co2 cartridges and brands. however when it comes to the BB's make sure you get the zinc or gold coated. They will be stronger then the copper. Hopefully this helps answer your question. Sincerely, Airgun Depot Customer Care Team

Not at all. For a gun with this power it is surprisingly quiet. It can be made even quieter by installing a compensator which is available at the Airgun Depot. By adding tape to cover the holes on the compensator, it becomes as quiet as gun with a silencer.

Yes it has the standard Picatinny rail , so most dot scopes will work, and you need one because the factor sights are total garbage. They do have to have enough elevation to get over the front BB storage area. I'm using a Leapers Red/Green dot. It requires no additional height.

Joe, Unfortunately, this particular gun only works with Co2. It uses a 88g CO2 tank. Hopefully that answers your question. Sincerely, Airgun Depot Customer Care Team

I have run about 10,000 rounds through the gun and the 6 Duracell AA batteries show no sign of weakening. I get about 350 shots per 88 gram CO2 cartridge on single shot. Probably a lot less on the burst settings. It does not come with CO2 or BB's. Hope this helps!

Jordan, No, this bb gun fires steel bbs only and could seriously injure another person. This particular bb gun is not an airsoft rifle and, therefore, cannot fire plastic bbs. Please let us know if you have any further questions. Sincerely, The Airgun Depot Customer Care Team

Try checking out at the sight and if there is a restriction you will get a warning before you purchase the product. There are a lot of different regulations for all different countries and they are always changing, so we have set up an automatic warring if there is a product, based on your location, that is forbidden. Shipping price always changes, but you should be able to see the final price before you complete your purchase.

Look on Umarex's site or pyramydair's accessories page, they have them there

Orders placed from the following areas will be refused due to the laws, restrictions and conditions of sale in your state or city: New York City and its boroughs, (ZIP Codes 100xx-104xx, 111xx, 112xx-114xx & 116xx), New Jersey (FFL required), Chicago, Michigan and Philadelphia PA and Washington, D.C. We cannot ship Co2 to Alaska, Hawaii Puerto Rico or any foreign country. Some restrictions may apply on sling shots and blank guns in some cities. It is your responsibility to know the laws in your area.

A weaver mount is used primarily on military and tactical weaponry in order to quickly and securely attach scopes, lasers, ANPQ and so forth. An optic compatible tactical rail is exactly what it sounds like, a Mounted railing on the top of the upper receiver (flat top of the gun) that makes it possible for scopes, Red dots, ACOG sights ect to be mounted.

Try checking out at the sight and if there is a restriction you will get a warning before you purchase the product. There are a lot of different regulations for all different countries and they are always changing, so we have set up an automatic warring if there is a product, based on your location, that is forbidden. Shipping price always changes, but you should be able to see the final price before you complete your purchase.

It depends on your local laws. In Michigan, its a toy untill 700fps

Yes you do. Also it very closely resembles a real fully automatic firearm, so once you obtain a PAL, keep it in a case until your ready to shoot it safely and within regulations.

Go to that webpage, where the item you want is. Click on "Add to Cart." (There will be a pop up with other items if you want those) Then click "proceed to checkout" if that is everything you want. When your checking out at the sight and there is a restriction you will get a warning before you purchase the product. There are a lot of different regulations for all different countries and they are always changing, so we have set up an automatic warring if there is a product, based on your location, that is forbidden.

Go to that webpage, where the item you want is. Click on "Add to Cart." (There will be a pop up with other items if you want those) Then click "proceed to checkout" if that is everything you want. When your checking out at the sight and there is a restriction you will get a warning before you purchase the product. There are a lot of different regulations for all different countries and they are always changing, so we have set up an automatic warring if there is a product, based on your location, that is forbidden.

Im sure your kidding bud. Because it would be illegal to shoot a duck with a rifle of any kind. And any offense involving a migratory game bird ie ducks,geese is a federal offense

No. Assuming your in season, I would honestly suggest skipping airguns entirely and using an actual Shotgun. Only high powered PCP's and break barrels posess the necessary power to kill a duck, and trying to hit a moving target in the air with a 17 -22 cal pellet (taking into account windbags and range constantly is changing for a midair target) is almost impossible. I have nothing but respect for airguns and they are very useful for many hunting scenarios, but at this point in time you are best to go with a hunting shotgun.

As with any Automatic firearm, there is definitely the potential for a jam, but seeing as it uses roundball ammo, it's not likely.

Vincent, Yes, we do ship to France if the right permits are obtained. The cost of shipping depends on what is being shipped. You can calculate it on our website. Sincerely, The Airgun Depot Customer Care Team

The answer to your question is YES, not some opinion of whats best in others eyes. If you find the working pressure and adjust the output of your hpa tank accordingly. HPA can work on ANY co2 gun provided you make or obtain all proper connections and adjust pressure to the running pressure of the marker/gun. It may not be best or most economical but it can work.

It's best to simply use the co2 cartridges. Using a tank is overkill for a BB gun.

this cartridge uses 88 gram CO2 canisters.

You can put different types of scopes and lasres on this gun but not iron sights.

this gun can have optics mounted to it. It would be more for looks than function though. The range on this gun would not require a scope.

often the seal needs to be lubed, Use pelgun oil on the end of your Co2 tank should solve the problem.

This gun will kill small mammals.

Yes, you would need something to clear the hopper on the front of the gun. High profile rings should do the trick.

Thank you for you interest. For questions about international ordering/shipping please email us at [email protected]. This so we can better help you.

Not sure of the operating pressure however I would highly recomend the adapter and Co2 tank. The normal tanks we went through in about 10min. Gun is a great toy and It's alot of fun but the disposable tanks go to fast. Upgrade to the paintball tank if you plan on purchasing it!

i had a similar idea that way i dont need to put the stock handle on but opted out on getting the 90 gram co2 tank..there cheap and it fits nicely in the stock...wallmart has em for about 12 bucks for 2...hope that helps you

I do not use Co2 I only use green gas or propane which have the advantage of not freezing up so much when you shoot at a high rpm .

The bulk fill adapter is so you can use bigger refillable Co2 canisters. This is not a necessary attachment as you can use 88 gram tanks.

Don't know about the 90g.....just use the 88g.

The external sizes of 88g and 90g CO2 cartridges are almost identical. The thread size is the same. The length of the dog point is the same. If everything is in working condition, there is no reason a 90g will not work in your Umarex EBOS. Trouble Shooting: I would check that your batteries are fresh. Then, if it still isn't firing, I would check if the cartridge was punctured. After that, I would check if your puncture pin is damaged or blocked. Checking your warranty would be the next step. Personally, I only use 90g CO2 cartridges now. I really like using JT 90 Gram Prefilled CO2 Tank, because they are very economical compared to 88g Crossman AirSource by 40% and 88g Walther by more than 50%. As far as getting more bang out of a 90g vs. 88g I would venture that you get a whole clip load more, but I haven't tested this. Feels exactly the same in every aspect except my wallet.