FX No Limit Scope Rings Features
- Picatinny/Weaver mounts
- 1 inch scope rings
- Adjust for height and angle
- Vertically adjustable 0.17 inches
- Angle adjustable +/- 1.5 degrees
- Easily adjustable with one screw located on each mount
- Overall height 0.915" - 1.085"
- ManufacturerFX Airguns
- Condition New
- Accessories Type Scope Mounts
- Warranty 90-day limited warranty
These scope rings are the best way to adjust your scope to the plane of your barrel without shimming. They are very high quality and don’t move once you tighten them down. I highly recommend them.
Super nice. They are worth the extra money. It has got my Benjamin trail shooting dead on. They corrected the point of impact from barrel drop. It allowed the welded weaver rail on barrel to be adjustable for elevation/windage on scope.
Pros
Excellent product
Cons
Cap screws need to be a 1/8 longer to clamp on weaver rail mounts. Iit is easy to strip the threads out. I already over tightened them.
Very well made, easy to install but mos importantly, they work nicely. If you are considering long distance shooting (+100 yards) they are a must. They adjust very easily with just the allen key provided.
I have also used them on a shotgun with scope where I had the opposite problem. The saddle mount I purchased was not level and I was shooting low. I elevated the rear mount and wad able to get it to zero.
Pros
Quality workmanship
Cons
Expensive
I had my scopes height maxed out all the way trying to sight it in. I could not even get my crosshairs within a foot of impact. Now I'm hitting directly on it, AND it is holding a zero. They aren't slipping at all and moved very smoothly in the vertical axis. They also have a great grip on the barrel of the scope.
Pros
-Great grip on barrel.
-Solid construction
-Solved the problem of Barrel Droop
-Holds its position
Cons
-None so far
Question?
Login to ask someone who bought this product.Do these rings have a weaver key integrated into the base or the mount to engage the front of the rail slot and stop forward motion under recoil? Not clear in the photos... Thanks!
asked TAre these sturdy enough to handle being used on a .22lr?
asked ErikCan I use these rings on bejamin trail np2? Will they hold zero on this piston air rifle
asked Jeff
No more "Shimming" the rear scope ring. These Rings are not only well made and well worth the coin but, they are necessary for many an airgun. Reason being is that many airguns have what we call barrel "DROOP" and often, with this "Droop" you can't get your rifle properly sighted in. You run out of vertical turret adjustment. Well, in comes FX No Limit Adjustable Rings and voila, you not only cure the Droop but you also get a lot of MOA (90 MOA) in this rings if you choose to shoot longer ranges.
Pros
Cures barrel droop issues associated with airguns Affordable (price has come down since introduction) Well made and well thought out design Gives about 90 MOA in vertical adjustment Straight forward installation Comes in all configurations, Dovetail, Weaver, 1" and 30mm
Cons
NONE